There are 14 spot glass rods on the left and 14 on-demand rods on the right to apply glass powder. The left side is responsible for the even number, and the right side is responsible for the odd number, a total of 28 glass point glass rods. After the glue is dispensed, it is dried with hot air and then discharged.

There are 14 spot glass rods on the left and 14 on-demand rods on the right to apply glass powder. The left side is responsible for the even number, and the right side is responsible for the odd number, a total of 28 glass point glass rods. After the glue is dispensed, it is dried with hot air and then discharged.

After loading the glass paste carbon strips, tip over 45 degrees to receive the receiving basket, the receiving basket can receive 50 carbon strips

High-density plasma, fast etching speed, uniform flow design to ensure etching uniformity <±3%

Six inch oven door

The 4-inch wafer boat converter is used for automatic transfer of wafers on a high temperature diffusion furnace, and the wafers on the quartz wafer boat are transferred to a general carrier boat
 

Slowly feed the crystal boat in and out, it can be moved to the fireside
 

Three layers of 3 PU rollers each, adjustable wheelbase + 9 sets of bearing seats and adjustment support seats

Single layer 2 PU rollers, adjustable roller distance, bearing seat*4
 

Single layer 3 PU rollers, adjustable roller distance, bearing seat*4
 

Vacuum generator suction cup, fixed wafer material sheet, HEATER is under the suction cup, can use temperature control sticker stickiness

2 turn signal test group, can put 2 turn signal levers at the same time for product testing

Vehicle power window button, which can repeatedly test the electrical properties of electronic products after actuation

Wafer dicing chuck, surface flatness within 3㎛

Using pneumatic power lift, by 2 single-rod cylinders with a cylinder diameter of 100MM